• Kopioi/liitä virheilmoitus näytöltäsi, jos sait sellaisen.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Selitä mitä halusit tehdä, mitä teit ja mitä tapahtui

• Mikä on selaimesi?

• Ole hyvä ja kopioi teksti englanniksi oman kielesi sijasta. Jos sinulla on kuvakaappaus tästä bugista (hyvä käytäntö), voit käyttää valitsemaasi kuvien isännöintipalvelua (snipboard.io ladataksesi sen ja kopioidaksesi/liittääksesi linkin tähän. Onko tämä teksti saatavilla käännösjärjestelmässä? Jos on, onko sen käännöksestä yli 24 tuntia?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mikä on selaimesi?

• Selitä ehdotuksesti tarkasti ja ytimekkäästi, jotta se on ymmärrettävissä niin helposti kuin mahdollista.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mikä on selaimesi?

• Mitä näytöllä näkyi kun olit estettynä (Tyhjä ruutu? Osa pelin käyttöliittymästä? Virheilmoitus?)

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mikä on selaimesi?

• Mitä osaa säännöistä BGA:n sovellus ei noudattanut

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Onko sääntörikkomus nähtävillä pelin toistossa? Jos kyllä, mikä on siirron numero?

• Mikä on selaimesi?

• Minkä pelin toiminnon halusit suorittaa?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mitä yritit tehdä tämän pelitoiminnon käynnistymiseksi?

• Mitä tapahtui kun yritit tehdä tämän (virheilmoitus, pelin tilapalkin viesti, ...)?

• Mikä on selaimesi?

• Missä vaiheessa peliä ongelma ilmeni (mikä oli silloinen pelin ohje)?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mitä tapahtui kun yritit tehdä tämän pelin toiminnon (virheilmoitus, pelin tilapalkin viesti, ...)?

• Mikä on selaimesi?

• Kuvaile näyttöongelmaa. Jos sinulla on kuvakaappaus tästä bugista (hyvä käytäntö), voit käyttää valitsemaasi kuvien isännöintipalvelua (snipboard.io ladataksesi sen ja kopioidaksesi/liittääksesi linkin tähän.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mikä on selaimesi?

• Ole hyvä ja kopioi teksti englanniksi oman kielesi sijasta. Jos sinulla on kuvakaappaus tästä bugista (hyvä käytäntö), voit käyttää valitsemaasi kuvien isännöintipalvelua (snipboard.io ladataksesi sen ja kopioidaksesi/liittääksesi linkin tähän. Onko tämä teksti saatavilla käännösjärjestelmässä? Jos on, onko sen käännöksestä yli 24 tuntia?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mikä on selaimesi?

• Selitä ehdotuksesti tarkasti ja ytimekkäästi, jotta se on ymmärrettävissä niin helposti kuin mahdollista.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mikä on selaimesi?