• Kopioi/liitä virheilmoitus näytöltäsi, jos sait sellaisen.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Selitä mitä halusit tehdä, mitä teit ja mitä tapahtui

• Mikä on selaimesi?

• Ole hyvä ja kopioi teksti englanniksi oman kielesi sijasta. Jos sinulla on kuvankaappaus tästä bugista, voit käyttää Imgur.com:a sen lähettämiseksi. Kopioi ja liitä linkki tähän.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Onko tämä teksti saatavilla käännösjärjestelmässä? Jos on, onko sen käännöksestä yli 24 tuntia?

• Mikä on selaimesi?

• Selitä ehdotuksesti tarkasti ja ytimekkäästi, jotta se on ymmärrettävissä niin helposti kuin mahdollista.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mikä on selaimesi?

• Mitä näytöllä näkyi kun olit estettynä (Tyhjä ruutu? Osa pelin käyttöliittymästä? Virheilmoitus?)

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mikä on selaimesi?

• Mitä osaa säännöistä BGA:n sovellus ei noudattanut

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Onko sääntörikkomus nähtävillä pelin toistossa? Jos kyllä, mikä on siirron numero?

• Mikä on selaimesi?

• Minkä pelin toiminnon halusit suorittaa?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mitä yritit tehdä tämän pelitoiminnon käynnistymiseksi?

• Mitä tapahtui kun yritit tehdä tämän (virheilmoitus, pelin tilapalkin viesti, ...)?

• Mikä on selaimesi?

• Missä vaiheessa peliä ongelma ilmeni (mikä oli silloinen pelin ohje)?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mitä tapahtui kun yritit tehdä tämän pelin toiminnon (virheilmoitus, pelin tilapalkin viesti, ...)?

• Mikä on selaimesi?

• Kuvaile näyttöongelmaa. Jos sinulla on kuvankaappaus tästä bugista, voit käyttää Imgur.com:a sen lähettämiseksi. Kopioi ja liitä linkki tähän.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mikä on selaimesi?

• Ole hyvä ja kopioi teksti englanniksi oman kielesi sijasta. Jos sinulla on kuvankaappaus tästä bugista, voit käyttää Imgur.com:a sen lähettämiseksi. Kopioi ja liitä linkki tähän.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Onko tämä teksti saatavilla käännösjärjestelmässä? Jos on, onko sen käännöksestä yli 24 tuntia?

• Mikä on selaimesi?

• Selitä ehdotuksesti tarkasti ja ytimekkäästi, jotta se on ymmärrettävissä niin helposti kuin mahdollista.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mikä on selaimesi?