• Kopioi/liitä virheilmoitus näytöltäsi, jos sait sellaisen.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Selitä mitä halusit tehdä, mitä teit ja mitä tapahtui

• Mikä on selaimesi?

• Ole hyvä ja kopioi teksti englanniksi oman kielesi sijasta. Jos sinulla on kuvankaappaus tästä bugista, voit käyttää Imgur.com:a sen lähettämiseksi. Kopioi ja liitä linkki tähän.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Onko tämä teksti saatavilla käännösjärjestelmässä? Jos on, onko sen käännöksestä yli 24 tuntia?

• Mikä on selaimesi?

• Selitä ehdotuksesti tarkasti ja ytimekkäästi, jotta se on ymmärrettävissä niin helposti kuin mahdollista.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Mikä on selaimesi?

• Mitä näytöllä näkyi kun olit estettynä (Tyhjä ruutu? Osa pelin käyttöliittymästä? Virheilmoitus?)

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Mikä on selaimesi?

• Mitä osaa säännöistä BGA:n sovellus ei noudattanut

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Onko sääntörikkomus nähtävillä pelin toistossa? Jos kyllä, mikä on siirron numero?

• Mikä on selaimesi?

• Minkä pelin toiminnon halusit suorittaa?

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Mitä yritit tehdä tämän pelitoiminnon käynnistymiseksi?

• Mitä tapahtui kun yritit tehdä tämän (virheilmoitus, pelin tilapalkin viesti, ...)?

• Mikä on selaimesi?

• Missä vaiheessa peliä ongelma ilmeni (mikä oli silloinen pelin ohje)?

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Mitä tapahtui kun yritit tehdä tämän pelin toiminnon (virheilmoitus, pelin tilapalkin viesti, ...)?

• Mikä on selaimesi?

• Kuvaile näyttöongelmaa. Jos sinulla on kuvankaappaus tästä bugista, voit käyttää Imgur.com:a sen lähettämiseksi. Kopioi ja liitä linkki tähän.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Mikä on selaimesi?

• Ole hyvä ja kopioi teksti englanniksi oman kielesi sijasta. Jos sinulla on kuvankaappaus tästä bugista, voit käyttää Imgur.com:a sen lähettämiseksi. Kopioi ja liitä linkki tähän.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Onko tämä teksti saatavilla käännösjärjestelmässä? Jos on, onko sen käännöksestä yli 24 tuntia?

• Mikä on selaimesi?

• Selitä ehdotuksesti tarkasti ja ytimekkäästi, jotta se on ymmärrettävissä niin helposti kuin mahdollista.

Here is one example when moving around locos (top) and another when choosing the advance 1 steel track action (bottom):

imgur.com/3NubNUr

For the first example, the only valid destination for the 4 loco that is currently being moved is to replace the 3 loco. The highlight on the 6 loco and on the construction site are misleading. The highlight on the 4 loco itself would be better if it was different as its role is different.

For the second example, none of the place highlighted can actually be clicked to complete the action.
The only valid place to click that actually works is the first position on the Osaka line.

-------------------------------

This leads also to a generic problem with this implementation in regards to the movement of tracks and industry tokens.

As a generic rule, the current position of the track or industry token is highlighted and you click there to advance it. BUT, there are situation where you have to click where you want the token to go (for instance when you want your industry token to ignore a placed factory and take the shortcut) and there is nothing to tell you that.

This makes people believe that they cannot do certain actions when in fact they can, it is "just" that the interface is opaque and not consistant.

I don't know what the global solution is. Maybe we should *always* target and highlight the destination rather than current "the origin except in a few situations". That or simply make the highlights a lot smarter so as to conform with the actual places where we can click.

As a side note, I think the highlights should be a bit more solid and visible.

• Mikä on selaimesi?